AL 8610SB

Add To Wishlist
All 6600 Series Exit Devices can be converted into alarm devices. Its feature is used to deter and signal the unauthorized use of an opening. For warning someone to open a controlled door, the push bar is printed with “EMERGENCY EXIT ONLY, PUSH TO OPEN ALARM WILL SOUND: in red lettering.

The Alarm Exit Device is operated by a 9 VDC battery, it has two alarm modules:

Type A – Monitors push bar

When the push bar is depressed, the horn will sound. This type is suitable for exit device without outside lever trim (for exit only).

Type B – Monitors push bar and latch bolt

When the push bar is depressed or the latch bolt is retraced by operating the outside lever trim, the alarm will sound.

Delayed Egress Exit Device

The Delayed Egress Exit Device can provide a controlled egress for opening. When the exit device is in the arming stage, it will deny exit to unauthorized person for 15 ~ 30 seconds if the push pad be depressed for 3 seconds or longer, the device will sound a local and remote audible alarm. The remote monitor signal will alert the security personnel for taking immediate action.

The Delayed Egress Exit Device is furnished with a sticker in red letters which states:

EMERGENCY EXIT ONLY
PUSH UNTIL ALARM SOUND
DOOR CAN BE OPENED IN 15 SECONDS


When the exit device is in the arming state, turning the key clockwise to Bypass position allows authorized personnel to exit for maintenance or emergent egress without alarming. If the exit device is in the alarming mode, turning the key switch counterclockwise to Reset position will release the device without alarming for egress and will rearm after 10 seconds.

Device is ANSI A156.3 grade 1 and ANSI A156.24.
Simplex Finish
US26 US26D US32D US3 US4 US10 313AN

BHMA
625 626 630 605 606 612 710
view category