Double Lipped Strike and Rescue Stop
Add To Wishlist
- For 5-3/4” and 6-3/4” frame with 1-3/4” door
- Ideal for hospital or nursing home bathroom doors. Strikes allow center hung or 1/8” inset double acting doors to swing in or out without damaging the frame.
- Counterweight door stop can be rotated flush with the strike to allow door to swing in either direction in the event of an emergency.
- Cut out is 1-1/4” x 11/16” to meet ANSI standards for mortise or HD cylindrical latch bolts. Check with manufacturer of specific mortise locks or latch bolts for deviations from these dimensions.
- Available in US32D, US32, US3, US4, US10B. For other finishes, contact factory.
- .093 thick material.
- 8-32 x 1/2” FHMS standard.
- Templates available for frame prep.
- Meets ANSI A1882
- For Center Hung Doors:
-- SPX CR4550 5-3/4” x 2-3/4”
-- SPX CR4560 6-3/4” x 2-3/4”
- For 1/8’ Offset Door:
-- SPX CR4570 5-3/4” x 2-3/4”
-- SPX CR4580 6-3/4” x 2-3/4”
- Ideal for hospital or nursing home bathroom doors. Strikes allow center hung or 1/8” inset double acting doors to swing in or out without damaging the frame.
- Counterweight door stop can be rotated flush with the strike to allow door to swing in either direction in the event of an emergency.
- Cut out is 1-1/4” x 11/16” to meet ANSI standards for mortise or HD cylindrical latch bolts. Check with manufacturer of specific mortise locks or latch bolts for deviations from these dimensions.
- Available in US32D, US32, US3, US4, US10B. For other finishes, contact factory.
- .093 thick material.
- 8-32 x 1/2” FHMS standard.
- Templates available for frame prep.
- Meets ANSI A1882
- For Center Hung Doors:
-- SPX CR4550 5-3/4” x 2-3/4”
-- SPX CR4560 6-3/4” x 2-3/4”
- For 1/8’ Offset Door:
-- SPX CR4570 5-3/4” x 2-3/4”
-- SPX CR4580 6-3/4” x 2-3/4”