SPX-ASE (Standard Escutcheon)
Add To Wishlist
Door thickness: Accommodates thickness of 1-3/8” to 2-1/2”.
Backset: 2-3/4” only.
Case: Cold formed steel, zinc dichromate plated, .090” thick. Optional lead wrapping available.
Hubs: Hardened steel.
Handing: LH/RH is standard; LHR/RHR optional. Reversible in the field.
Cylinders: Solid brass cylinder and plug. 5, 6 or 7-pin are available on standard cylinders. 6 or 7-pin are available on interchangeable core cylinder. Furnished with two nickel silver keys standard
Keyways: “C” keyway standard on standard cylinder. “E” keyway standard on I/C cylinder.
Bind Resistant Trim: Heavy-duty through-bolted inserts clamp the trim on the door assuring proper alignment. Provided with 8-32 screws for strength and thread sealant to prevent loosening.
Latch Bolt: Two-piece stainless steel, mechanical anti-friction bolt. 3/4” projection.
Dead Bolt: 1” throw, stainless steel with two 13/16” diameter hardened steel, free-turning, saw-resistant rollers.
Faceplates: (Armored Front) 1-1/4” x 8” brass or stainless steel adjustable for door bevel. Reinforced by heavy gauge steel with stabilizing ribs.
Strike: Brass or stainless steel. Meets ANSI A115.1 for frame preparation.
ANSI/BHMA: Meets ANSI/BHMA 156.13, Series 1000.
UL: 3 hour A label.
Backset: 2-3/4” only.
Case: Cold formed steel, zinc dichromate plated, .090” thick. Optional lead wrapping available.
Hubs: Hardened steel.
Handing: LH/RH is standard; LHR/RHR optional. Reversible in the field.
Cylinders: Solid brass cylinder and plug. 5, 6 or 7-pin are available on standard cylinders. 6 or 7-pin are available on interchangeable core cylinder. Furnished with two nickel silver keys standard
Keyways: “C” keyway standard on standard cylinder. “E” keyway standard on I/C cylinder.
Bind Resistant Trim: Heavy-duty through-bolted inserts clamp the trim on the door assuring proper alignment. Provided with 8-32 screws for strength and thread sealant to prevent loosening.
Latch Bolt: Two-piece stainless steel, mechanical anti-friction bolt. 3/4” projection.
Dead Bolt: 1” throw, stainless steel with two 13/16” diameter hardened steel, free-turning, saw-resistant rollers.
Faceplates: (Armored Front) 1-1/4” x 8” brass or stainless steel adjustable for door bevel. Reinforced by heavy gauge steel with stabilizing ribs.
Strike: Brass or stainless steel. Meets ANSI A115.1 for frame preparation.
ANSI/BHMA: Meets ANSI/BHMA 156.13, Series 1000.
UL: 3 hour A label.
